{"title":"New Products You Can Pre-Order","description":null,"products":[{"product_id":"fes577713","title":"FESTOOL 577713 Cordless delta sander DTSC 200-Basic","description":"\u003cp\u003eBattery activated, light on – for optimal surfaces, corners, and edges. Whether you're working in the workshop or in a hard-to-reach spot, the DTSC 200 cordless delta sander provides maximum mobility when sanding. Its integrated LED light ring enhances your visibility of the surface and highlights unevenness during the process. Large-scale, precise, and edge-close: the DTSC 200 is the versatile solution for your tasks. Thanks to its generous sanding surface, you can effortlessly tackle inaccessible areas and deep recesses – all without needing to change tools. Delivering maximum efficiency and smooth surfaces with just one tool. Lights on: Cordless single-handed delta sander with integrated light ring.  Individual lighting: There are two light modes that can be set on the machine – full lighting or dimmed light.  Additional features with the Festool App: Using your smartphone, you can seamlessly adjust the brightness and set the lighting duration – allowing you to inspect the surface once again after sanding.  Innovative motor technology: The EC 2.0 motor is robust and durable, offering exceptionally low noise output and requiring minimal maintenance.  Protects your workpiece: The carbide-tipped sanding pad brake prevents the sanding pad from revolving too quickly when idling – which enables the tool to be applied to a surface without producing scratches and saves you the need for costly rework.  Protects your health: The vibration protection guarantees comfortable work without your hands getting tired too soon. Tables, surfaces, doors, door frames, window beams, staircases for indoor and outdoor use, timber structures, wooden facades, eaves, small areas in dry construction, fences, furniture restoration, balcony planks, and much more. Perfect view of your finish.  One sander – numerous applications.  Triple sanding within the system. The integrated LED light ring enhances visibility on the surface, making irregularities easier to detect. The built-in light and eccentric sanding motion of the DTSC 200 allows you to achieve a flawless finish.  Spacious, precise, and edge-focused: The DTSC 200 is the versatile solution for your applications. With its broad support surface, it effortlessly reaches even difficult-to-access areas and deep gaps – all without the need to change tools. Designed for optimal efficiency and smooth surfaces using just one device, its powerful 4.0 Ah battery facilitates swift progress and is fully compatible with your 18V cordless tools and chargers.  The Granat Delta 200 abrasive for the large cordless delta sander DTSC 200 can be used three times – simply tear off the tip along the perforation, rotate it, and keep working. This reduces abrasive consumption, saves costs, and conserves resources – enabling sustainable work within a system. Illuminating. Independent working. Variety within the Festool system. Infinitely variable speed preselector. Working with a Festool system. Three light modes can be set on the machine – full lighting, 50% dimmed light or no light. You can use your Festool app to dim the light in a customised and infinitely adjustable manner and to set the afterglow time – enabling you to check the surface again after finishing sanding.  Work practically and independently without a mobile dust extractor. Wherever you are, the dust collection bag for the DTSC 200 provides you with maximum freedom of movement when sanding, completely free from the inconvenience of a suction hose.  The DTSC 200 all-rounder provides extensive versatility for your sanding tasks. Within the Festool system, you can utilise the abrasives for the DTSC 200 in three distinct ways – simply tare off at the perforation, rotate and resume working.  You can set the appropriate speed for every material – with constant power even under high loads.  The 18V power in the Festool system enables you to seamlessly switch between batteries and machines.\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991789646207,"sku":"FES577713","price":387.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES577713.webp?v=1773571859"},{"product_id":"fes577988","title":"FESTOOL 577988 Cordless Plunge Saw TSC 55 KSEB-Basic (Pre-order)","description":"\u003cp\u003eCreated for professionals like you. The cordless plunge-cut saw TSC 55 KS. Since 1980, you have been able to rely on Festool plunge-cut saws for dependable quality and absolute precision. The result of this expertise? A new generation of cordless plunge-cut saws – as versatile as your challenges, as precise as you have come to expect. The TSC 55 KS delivers full power and maximum flexibility for your daily tasks: with just one battery pack, it is immediately ready for use, fits perfectly in your hand and supports you in every application. You will experience its full power especially when paired with the high-performance 8.0 Ah battery pack. Combined with the 1.6 mm thin-kerf saw blades, you not only enjoy exceptional cutting performance, but the specially designed tooth configuration also ensures particularly clean cutting results. To ensure your safety while sawing, the sensor-based KickbackStop reliably protects you from kickbacks when cutting or plunging into the workpiece. Your sawing experience is rounded off with intelligently designed system accessories: guide rails, angle stops, and sawing tables deliver precise results even with demanding applications – without the need for complex preparations or rework. Powerful: Brushless EC-TEC motor running at 5,200 rpm, paired with lithium-ion batteries for top-notch cutting performance.  18 V power: Perfect when teamed up with the 8.0 Ah Li-HighPower battery pack for ultimate run time and top performance. It's also compatible with the 5.0 Ah Li-HighPower battery pack.  1.6 mm thin saw blades: Designed just for cordless saws, so you can get through your work quicker and enjoy longer battery life.  Safe sawing: The innovative KickbackStop minimises the risk of injury caused by kickback when sawing or plunging into the workpiece.  Precise: Simple, precise and repeatable mitre cuts can be achieved by setting mitre angles from -1° to 47°.  Convenient: The FastFix spindle stop and sophisticated design make it extremely easy to change the saw blade.  Best orientation: A transparent sliding viewing window provides a good view of the saw blade.  Top-class sawing system: Simplifies tasks with a range of accessories, light module, dust bag and guide rail. Precise circular in materials up to 55 mm thick. Cutting recesses in doors, kitchen worktops, or wall cladding.  Trimming interior doors to size – Guide rail with plunge saw.  Producing expansion joints and making repairs to parquet flooring, as well as shadow gaps. Lightweight, compact, immediately ready for use.  Performance that keeps pace with you.  Protects you from setbacks. The TSC 55 KS brings together all the essential features a cordless saw needs to support you in your on-the-go tasks. Its compact design, lightweight construction and full performance with just one battery pack make it a versatile tool. The sleek design not only feels exceptionally comfortable in your hand but also broadens its applications: precise cuts directly against the wall and flush alignment with the guide rail. With one battery pack on the saw and a second charging, you can work without interruptions throughout the day.  One battery pack and excellent cutting performance. Harmoniously paired, the power electronics and the brushless EC-TEC motor of the TSC 55 KS extract the maximum potential from your 8.0 Ah battery pack. Combined with the thin-kerf saw blades, specially designed for the cordless circular saw and featuring a cutting width of just 1.6 mm, you achieve unparalleled efficiency and quality. Ensuring effortless operation and outstanding cutting results.  You focus on sawing, and we’ll handle the safety: Kickback is the most frequent cause of severe injuries when using a plunge-cut saw. That’s why the innovative KickbackStop halts the saw blade on our cordless plunge-cut saw faster than the blink of an eye, protecting not only your workpiece but also significantly reducing the risk of injury to your hands. Greater power and endurance. Exceptional torque. More safety thanks to KickbackStop. Exact depth setting. Low-dust mobile working. Optimal lighting conditions. Lockable angled fitting. Stay connected. Edge sawing. Perfect cuts reduce the need for reworking. Easier saw blade changing. Systems of possibilities. The TSC 55 KS is equipped with a brushless EC-TEC motor delivering 5,200 rpm. Combined with the power electronics and the 8.0 Ah battery pack, it ensures optimal cutting performance and extended operating durations.  In line with the concentrated power of our plunge-cut saw: The 1.6 mm thin-kerf saw blades. Specifically designed for cordless saws to deliver clean cutting results, swift progress and prolonged battery life.  The integrated KickbackStop minimises the risk of injury caused by kickback when sawing or plunging into the workpiece. This safeguards not only your workpiece but also your hands.  Easy to read and adjust: Cutting depth adjustment with dual pointer and fine adjustment for precise setting and parallax-free reading. Suitable for use with or without a guide rail.  We prioritise health in two ways: Whether using a dust collection bag or an extractor with Bluetooth® automatic start-up – with the Festool extraction system, you work virtually dust-free.  Quick and easy retrofitting for optimal illumination: The LED attachment light brightens your sawing area. Shadow-free illumination to the right of the plunge-cut saw – precisely where it matters: directly on the workpiece.  Fixed position or 360° flexibility: You decide whether the extraction hose is fixed in a desired position or whether it rotates flexibly to suit your application.  You can always get important info about the saw thanks to its connection with the Festool app. This covers a detailed view of the battery's charge level, plus data on the current motor temperature or the KickbackStop feature. You can also get software updates.  The flat housing facilitates edge-proximate cuts. Owing to the saw's compact design, you can operate with a minimum wall clearance of only 12 mm.  When using the attachable splinter guard in combination with the guide rail, cuts on both sides can be made virtually splinter-free.  The FastFix spindle stop enables you to change the saw blade quickly and effortlessly. Its compact and well-thought-out design allows the saw to be laid on its side, further streamlining the blade-changing process.  Our sawing accessory system is as diverse as your needs. Ingenious accessories such as saw blades, dust extraction, angle stops, and splinter guards provide you with a first-class sawing system. cutting of various panel materials.\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991791251839,"sku":"FES577988","price":464.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES577988_f2083856-9363-4f85-aab9-71c66bd2eec6.jpg?v=1771589429"},{"product_id":"fes578502","title":"FESTOOL 578502 Rapid charger SYS-MC 6\/4 (Pre-order)","description":"\u003cp\u003eOne socket - quadruple charging. The multi-charger takes your battery management to the next level. You can charge up to four batteries at the same time, save time and socket outlets and have everything centrally organised and in view. Your batteries are accessible from all sides - for quick access and maximum ease of use. Thanks to complete Systainer integration, your workplace remains tidy - whether in the workshop, in the vehicle or on the construction site. Always up to date: LED display shows the remaining charge status.|Compatible in the Festool system: The multi-loader is compatible with all Festool battery packs in the 10.8V to 18V voltage classes (exceptions: BP-XS battery pack for CXS\/TXS and MXC charger and BP Ergo battery packs).|Neatly stowed away: Your batteries and charging cable are safe, tidy and always to hand in the multi-charger.|Access from all sides: Your batteries are easily accessible from all sides at all times, even with stacked Systainers.|Charge in parallel and save time: The multi-charger charges up to four batteries simultaneously and in parallel - with just one device and one socket. Charging and transporting 4 battery packs in the workshop, in the vehicle and on the construction site. Quadruple charging. Simply faster.|One charger. Everything in the system.|Optimised work processes. Charge up to four batteries at the same time - quickly, in parallel and with just one socket. Your batteries are ready for use again in no time at all. Charge your smartphone at the same time with the two integrated USB (Type-C) ports built into the multi-charger.|Whether stacking, coupling or transporting - the Multilader is fully integrated into the Systainer system. It can be seamlessly connected in the Systainer system and your batteries remain accessible from all sides.|A charger for your batteries - clear, mobile and organised. With the SYS-MC 6\/4, you can keep an eye on your batteries and know which ones are already charged. At the same time, you can transport up to four batteries in the multi-charger with one of the two integrated carrying handles. This keeps you perfectly organised and optimises your work processes on the construction site. Charge in parallel, save time|Always up to date|Compatible in the Festool system|Access from all sides. Charges up to four battery packs simultaneously and in parallel - with just one device and one socket.|LED display to show the charging status.|The multi-loader is compatible with all Festool battery packs in volt classes 10.8 V to 18 V (exceptions: BP-XS battery pack for CXS\/TXS and MXC charger and BP Ergo battery packs).|Your battery packs are easily accessible from all sides at all times, even with stacked Systainers. for all battery packs in the 10.8 V to 18 V voltage classes (exceptions: BP-XS battery pack for CXS\/TXS and MXC charger as well as BP Ergo battery packs)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991793283455,"sku":"FES578502","price":321.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578502.webp?v=1772539797"},{"product_id":"fes578521","title":"FESTOOL 578521 Cordless pendulum jigsaw PSC-E 18 EB-Basic (Pre-order)","description":"\u003cp\u003ePSC E 18 - Easy jigsawing. Weighing just 2.3 kg including battery pack and with a slim, ergonomic design, the small cordless jigsaw is reduced to the essentials: right-angled and straight cuts with material thicknesses of up to 40 mm. Operation is simple. A fixed 90° table and a guide roller suitable for any saw blade width ensure that it is ready for use quickly, without time-consuming setup time. You don't have to compromise on working comfort and material compatibility. With the tool-free saw blade change and speed adjustment with automatic start-up, you can create application-optimised conditions at all times. The matching battery pack is also particularly handy and a real power pack: The powerful TBX 4 battery ensures fast work progress and is compatible with all your 18V cordless machines and chargers. Light and compact: Low weight for fatigue-free work and controlled handling.  Simply at right angles: Guided saw blade and fixed 90° table for consistent precision.  Cutting performance: With 23 mm stroke and pendulum stroke adjustment, suitable for typical assembly work.  18V Power: Ideal in combination with the TBX 4 Compact battery pack - saves on weight but not on power.  Gentle on materials: the plastic outsole is gentle on wood and wood-like materials. Trimming work on furniture, kitchens, for interior fitting. Coping end strips. Cutting workpieces to length. Fits really well in the hand.  Easy to operate.  All the cordless power you need. At just 2.3 kg, the small jigsaw is a real lightweight. The slim, ergonomic design ensures comfortable handling and maximum control in any situation.  Immediately ready for your cut: The fixed 90° table and a guide roller suitable for all saw blade widths save you tedious setup times with consistently perfect results.  Fits perfectly: The powerful TBX 4 battery with innovative tabless cell technology ensures fast work progress and is compatible with your 18V cordless machines and chargers. Lightweight and handy. Working with a Festool system. Stable saw blade guide. Clear view of the scribe mark. Quick blade change. Low-cutting for less rework.  Simply at a right angle. Low-dust work. Low weight, slim design and non-slip soft grip coating for optimum handling.  The 18V power in the Festool system enables you to seamlessly switch between batteries and machines.  The triple saw blade guide ensures precise, angular cuts with material thicknesses of up to 40 mm.  The light, dust extraction and blowing function keep the view of the scribe clear.  Tool-free, one-handed saw blade change for fast work processes and material-appropriate work.  The clip-on splinter guard ensures low-crack cuts and saves time-consuming reworking.  The fixed 90° table ensures right-angled cuts - easily and without adjustment.  For low-dust work, a mobile dust extractor can be connected via the Click-Fix dust extraction system. for work up to 40 mm material thickness.\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991793381759,"sku":"FES578521","price":221.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578521.webp?v=1772718236"},{"product_id":"fes578732","title":"FESTOOL 578732 Energy set 18V 2xTBX4\/TCL6 (Pre-order)","description":"\u003cp\u003eThe starter set for your 18V cordless tools. Open the lid and off you go: The 18V starter set is the practical basic supply for your start with Festool cordless tools. The set contains two powerful 4.0 Ah tabless battery packs, the compact power packs for your applications with medium and high power requirements. Also included is a TCL 6 quick charger, which recharges your battery packs quickly and can also be attached to the wall using the slotted holes on the back. Naturally, the battery packs and charger are fully covered by Festool Service. Fatigue-free working: with the TBX 4 battery packs for full power with low weight.|Full power: tabless cell technology delivers maximum power even for demanding applications.|Long-lasting: The low heat generation of the tabless cells extends the service life of the batteries.|Shorter charging cycles: The batteries can be charged directly after use due to their low heat generation.|Suction starts automatically: The Bluetooth® battery packs start a paired vacuum cleaner automatically when the tool is switched on.|Smart extended: The Festool app, in combination with the Bluetooth® function of the battery pack, enables clever additional functions, such as the detailed display of the charge status and other operating data such as temperature or charge cycles.|Super flexible: The TCL 6 quick charger is suitable for almost all lithium-ion battery packs in volt classes 10.8 V to 18 V (exception: BP-XS for CXS\/TXS and MXC charger).|All-round cover: It goes without saying that chargers and battery packs are also fully covered by Festool Service. Battery products' power supply. Extremely powerful.|Full power, low weight.|Completely covered. The 18 V starter set is the power pack for your Festool cordless tools and provides you with the power you need. The set contains two 4.0 Ah tabless battery packs and a TCL 6 quick charger - so you can get started straight away.|TBX 4 Compact battery packs are particularly handy and offer full power at a weight of just 600 g. Thanks to tabless cell technology, they not only run for longer, but can also be recharged quickly with the TCL 6 charger - for continuous and powerful work.|All Festool battery packs and chargers, like all Festool tools, are of course completely covered by Festool SERVICE, giving you peace of mind for your day-to-day work. This allows you to concentrate on what's most important: Your work. Work without getting tired|Charged in a heartbeat|More functions: With Bluetooth® and The Festool app. The TBX 4 Compact battery pack is particularly light and handy - a power pack with full power and a weight of just 600g.|Due to their low heat generation, tabless battery packs can be charged directly without a cooling phase - so they are ready for use again in a flash.|With the Bluetooth® battery pack, a paired vacuum cleaner is started automatically when the cordless tool is switched on. With The Festool app, you can display detailed information on the battery pack's charge status at anytime and call up operating data such as temperature and charge cycles. as an ideal addition to the Basic variants or as additional battery packs for the workshop or construction site. for all applications and 18-volt devices – with an emphasis on maximum power but lightweight (except ETSC 125, RTSC 400, DTSC 400)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991794004351,"sku":"FES578732","price":276.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578732.webp?v=1773158589"},{"product_id":"fes578745","title":"FESTOOL 578745 Tabless battery pack BP 18 TBX 4 C-ASI (Pre-order)","description":"\u003cp\u003eThe compact one: Full power with low weight. With tabless cell technology. The powerful TBX 4 battery with tabless technology is your ideal partner for powerful applications - with low weight and good handling at the same time. The tabless cells make it possible: less heat development, longer runtimes and faster charging times. Thanks to AIRSTREAM technology, the battery pack with the AIRSTREAM SCA 16 quick charger is actively cooled before and during the charging process and is ready for use again extremely quickly. The optimised energy flow of the tabless batteries gives you that extra portion of power and ensures a longer service life for your battery pack. Equipped with Bluetooth®, it automatically starts a paired vacuum cleaner when the cordless tool is switched on - and, in combination with The Festool app, provides detailed information on the charge level, temperature or charge cycles. And, of course, it is fully covered by the Festool Service 3-year warranty. Fatigue-free working: 4.0 Ah for full power with a weight of only 600g.|Full power: tabless cell technology delivers maximum power even for demanding applications.|Long-lasting: The low heat generation of the tabless cells extends the service life of the batteries.|Hot or cold: Tabless batteries are reliably ready for use even in extreme temperatures.|Shorter charging cycles: The batteries can be charged directly after use due to their low heat generation.|Charged at lightning speed: Ready for use again in 25 minutes thanks to the AIRSTREAM SCA 16 quick charger. This is made possible by active cooling during the charging process.|Practical: The LED display shows the battery pack's charge level anytime.|Sure thing: Round frame made from soft-touch material to protect and securely support the machine on sloping surfaces.|Convenient: Bluetooth® enables the CLEANTEC vacuum cleaner to start automatically when the cordless tool is switched on (provided a Bluetooth®-enabled vacuum cleaner is used).|Smart extended: The Festool app, in combination with the Bluetooth® function of the battery pack, enables clever additional functions, such as the detailed display of the charge status and other operating data such as temperature or charge cycles.|For stress-free work: The battery packs are, of course, completely covered with Festool Service. Ideal for all applications placing high demands on the ergonomics of the machine|Ideal when high performance and compact size are required. Extra power for your cordless tools.|Full power, low weight.|More functions: With Bluetooth® and the Festool app. More power, more runtime, more service life: TBX battery packs with tabless cell technology provide you with the ultimate power upgrade for your cordless tools.|The TBX 4 Compact battery pack saves on weight, but not on power. At just 600 grams, it is particularly handy and a real power pack. You can use it ideally for your applications with medium and high power requirements.|With the Bluetooth® battery pack, a paired vacuum cleaner is started automatically when the cordless tool is switched on. With The Festool app, you can display detailed information on the battery pack's charge status at anytime and call up operating data such as temperature and charge cycles. Work without getting tired|Charged in a heartbeat|Stay connected. The TBX 4 Compact battery pack is particularly light and handy - a power pack with full power and a weight of just 600g.|Due to their low heat generation, tabless battery packs can be charged directly without a cooling phase - so they are ready for use again in a flash.|The battery pack can be easily connected to The Festool app. This gives you access to operating data such as temperature and the charge status at anytime. Regular software updates keep the battery pack and machine up to date. Bluetooth® lithium-ion (Li-Ion) battery pack with tabless cell technology and AIRSTREAM function. for all applications and 18-volt devices – with an emphasis on maximum power but lightweight (except ETSC 125, RTSC 400, DTSC 400)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991794790783,"sku":"FES578745","price":118.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578745.webp?v=1772718201"},{"product_id":"fes578746","title":"FESTOOL 578746 Tabless battery pack BP 18 TBX 8 ASI (Pre-order)","description":"\u003cp\u003eThe endurer: Extremely powerful with a long runtime. With tabless cell technology. The most powerful and long-lasting battery pack in the Festool portfolio: No matter which machine, no matter which application - the TBX 8 with tabless technology ensures maximum power and endurance even in heavy-duty applications. The tabless cells make it possible: lower heat generation, longer runtimes and faster charging times. Thanks to AIRSTREAM technology, the battery pack is actively cooled with the AIRSTREAM fast charger SCA 16 before and during the charging process and is ready for use again extremely quickly. The optimised energy flow of the tabless batteries gives you that extra portion of power and ensures a longer service life for your battery pack. Equipped with Bluetooth®, it automatically starts a paired vacuum cleaner when the cordless tool is switched on - and, in combination with The Festool app, provides detailed information on the charge level, temperature or charge cycles. And, of course, it is fully covered by the Festool Service 3-year warranty. Extremely powerful: 8.0 Ah for enormous endurance and power delivery in applications with the highest power requirements.|Full power: tabless cell technology delivers maximum power even for demanding applications.|Long-lasting: The low heat generation of the tabless cells extends the service life of the batteries.|Hot or cold: Tabless batteries are reliably ready for use even in extreme temperatures.|Shorter charging cycles: The batteries can be charged directly after use due to their low heat generation.|Charged at lightning speed: Ready for use again in 25 minutes thanks to the AIRSTREAM SCA 16 quick charger. This is made possible by active cooling during the charging process.|Practical: The LED display shows the battery pack's charge level anytime.|Sure thing: Round frame made from soft-touch material to protect and securely support the machine on sloping surfaces.|Convenient: Bluetooth® enables the CLEANTEC vacuum cleaner to start automatically when the cordless tool is switched on (provided a Bluetooth®-enabled vacuum cleaner is used).|Smart extended: The Festool app, in combination with the Bluetooth® function of the battery pack, enables clever additional functions, such as the detailed display of the charge status and other operating data such as temperature or charge cycles.|For stress-free work: The battery packs are, of course, completely covered with Festool Service. Heavy-duty applications with maximum power needs|Applications that require extreme battery endurance. Extra power for your cordless tools.|Hardy and high-performing work.|More functions: With Bluetooth® and the Festool app. More power, more runtime, more service life: TBX battery packs with tabless cell technology provide you with the ultimate power upgrade for your cordless tools.|The TBX 8 battery pack offers you maximum runtimes and full power for your toughest applications. Thanks to tabless cell technology, it not only runs longer, but can also be recharged at lightning speed - for continuous and long-lasting work.|With the Bluetooth® battery pack, a paired vacuum cleaner is started automatically when the cordless tool is switched on. With The Festool app, you can display detailed information on the battery pack's charge status at anytime and call up operating data such as temperature and charge cycles. Incredibly powerful with a long battery life|Charged in a heartbeat|Stay connected. Thanks to tabless cell technology, the TBX 8 battery pack is ideal for heavy-duty applications with the highest power requirements.|Due to their low heat generation, tabless battery packs can be charged directly without a cooling phase - so they are ready for use again in a flash.|The battery pack can be easily connected to The Festool app. This gives you access to operating data such as temperature and the charge status at anytime. Regular software updates keep the battery pack and machine up to date. Bluetooth® lithium-ion (Li-Ion) battery pack with tabless cell technology and AIRSTREAM function. for all applications and 18-volt gear – with an emphasis on top performance and stamina (except ETSC 125, RTSC 400, DTSC 400, CTC SYS)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991795020159,"sku":"FES578746","price":189.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578746.webp?v=1772718189"},{"product_id":"fes578820","title":"FESTOOL 578820 Energy set 18V 2xTBX4\/TCL6DUO (Pre-order)","description":"\u003cp\u003eWell packed and quickly charged: Two battery packs. One quick charger. In the Systainer³. The Festool Energy set is the ideal addition to the Festool Basic variants and also offers additional battery packs for the workshop and construction site. Available with different equipment according to the individual main applications and energy requirements. Always with sufficient space for a total of four battery packs – of which two can be charged at the same time using the TCL 6 DUO rapid charger. Particularly practical: You no longer need to look for another socket for a second charger – making work easy and saving time on construction sites, in bodyshops and in vehicles. Of course everything cleanly packaged in the Systainer³ and fully covered by Festool Service. Fatigue-free working: with the TBX 4 battery packs for full power with low weight.|Full power: tabless cell technology delivers maximum power even for demanding applications.|Long-lasting: The low heat generation of the tabless cells extends the service life of the batteries.|Suction starts automatically: The Bluetooth® battery packs start a paired vacuum cleaner automatically when the tool is switched on.|Smart extended: The Festool app, in combination with the Bluetooth® function of the battery pack, enables clever additional functions, such as the detailed display of the charge status and other operating data such as temperature or charge cycles.|Charges two at the same time: The DUO rapid charger charges two battery packs at exactly the same time. This makes it suitable for all battery packs from voltage classes 10.8 V to 18 V (with the exception of: BP-XS for CXS\/TXS and MXC charger)|Completely covered. Of course, the DUO rapid charger and all battery packs are also fully covered by Festool SERVICE. Battery products' power supply. The power supply for your 18V cordless tools.|Full power, low weight.|Completely covered. Whether as a supplement to the Basic versions or for even more battery power in the workshop and on the construction site: The energy Systainer is the ideal addition to your Festool cordless tools and provides you with the right amount of power. The set contains two 4.0 Ah tabless battery packs and a DUO quick charger - all neatly stowed away in the Systainer³.|TBX 4 Compact battery packs are particularly handy and a real power pack. Thanks to tabless cell technology, they not only run for longer, but can also be recharged at lightning speed - even two battery packs at the same time with the DUO quick charger.|All Festool battery packs and chargers, like all Festool tools, are of course completely covered by Festool SERVICE, giving you peace of mind for your day-to-day work. This allows you to concentrate on what's most important: Your work. Work without getting tired|Extra mobile with vehicle integration|More functions: With Bluetooth® and The Festool app. The TBX 4 Compact battery pack is particularly light and handy - a power pack with full power and a weight of just 600g.|The Systainer³ can be perfectly integrated into the bott van racking system for easy transport from the workshop to the construction site.|With the Bluetooth® battery pack, a paired vacuum cleaner is started automatically when the cordless tool is switched on. With The Festool app, you can display detailed information on the battery pack's charge status at anytime and call up operating data such as temperature and charge cycles. as an ideal addition to the Basic variants or as additional battery packs for the workshop or construction site. for all applications and 18-volt devices – with an emphasis on maximum power but lightweight (except ETSC 125, RTSC 400, DTSC 400)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991795118463,"sku":"FES578820","price":338.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578820.webp?v=1773158669"},{"product_id":"fes578824","title":"FESTOOL 578824 Energy set 18V 4xTBX4\/TCL6DUO (Pre-order)","description":"\u003cp\u003eWell packaged and quickly charged: Four battery packs. One quick charger. In a Systainer³. The Festool Energy set is the ideal addition to the Festool Basic variants and also offers additional battery packs for the workshop and construction site. Available with different equipment according to the individual main applications and energy requirements. Always with sufficient space for a total of four battery packs – of which two can be charged at the same time using the TCL 6 DUO rapid charger. Particularly practical: You no longer need to look for another socket for a second charger – making work easy and saving time on construction sites, in bodyshops and in vehicles. Of course everything cleanly packaged in the Systainer³ and fully covered by Festool Service. Fatigue-free working: with the TBX 4 battery packs for full power with low weight.|Full power: tabless cell technology delivers maximum power even for demanding applications.|Long-lasting: The low heat generation of the tabless cells extends the service life of the batteries.|Suction starts automatically: The Bluetooth® battery packs start a paired vacuum cleaner automatically when the tool is switched on.|Smart extended: The Festool app, in combination with the Bluetooth® function of the battery pack, enables clever additional functions, such as the detailed display of the charge status and other operating data such as temperature or charge cycles.|Charges two at the same time: The DUO rapid charger charges two battery packs at exactly the same time. This makes it suitable for all battery packs from voltage classes 10.8 V to 18 V (with the exception of: BP-XS for CXS\/TXS and MXC charger)|Completely covered. Of course, the DUO rapid charger and all battery packs are also fully covered by Festool SERVICE. Battery products' power supply. The power supply for your 18V cordless tools.|Full power, low weight.|Completely covered. Whether as a supplement to the Basic versions or for even more battery power in the workshop and on the construction site: The energy Systainer is the ideal addition to your Festool cordless tools and provides you with the right amount of power. The set contains four 4.0 Ah tabless battery packs and a DUO quick charger - all neatly stowed away in the Systainer³.|TBX 4 Compact battery packs are particularly handy and a real power pack. Thanks to tabless cell technology, they not only run for longer, but can also be recharged at lightning speed - even two battery packs at the same time with the DUO quick charger.|All Festool battery packs and chargers, like all Festool tools, are of course completely covered by Festool SERVICE, giving you peace of mind for your day-to-day work. This allows you to concentrate on what's most important: Your work. Work without getting tired|Extra mobile with vehicle integration|More functions: With Bluetooth® and The Festool app. The TBX 4 Compact battery pack is particularly light and handy - a power pack with full power and a weight of just 600g.|The Systainer³ can be perfectly integrated into the bott van racking system for easy transport from the workshop to the construction site.|With the Bluetooth® battery pack, a paired vacuum cleaner is started automatically when the cordless tool is switched on. With The Festool app, you can display detailed information on the battery pack's charge status at anytime and call up operating data such as temperature and charge cycles. as an ideal addition to the Basic variants or as additional battery packs for the workshop or construction site. for all applications and 18-volt devices – with an emphasis on maximum power but lightweight (except ETSC 125, RTSC 400, DTSC 400)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991795347839,"sku":"FES578824","price":539.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578824.webp?v=1773158682"},{"product_id":"fes578898","title":"FESTOOL 578898 Energy set 18V 2xTBX8\/SCA16 (Pre-order)","description":"\u003cp\u003eThe starter set for your 18V cordless tools. Open the lid and off you go: The 18V starter set is the practical basic supply for your start with Festool cordless tools. The set contains two powerful 8.0 Ah tabless battery packs for maximum power and endurance in heavy-duty applications. Also included is an AIRSTREAM fast charger SCA 16 with active, intelligent air cooling before and during the charging process. Naturally, the battery packs and the charger are fully covered by Festool Service. Extremely powerful: 8.0 Ah for enormous endurance and power delivery in applications with the highest power requirements.|Full power: tabless cell technology delivers maximum power even for demanding applications.|Long-lasting: The low heat generation of the tabless cells extends the service life of the batteries.|Shorter charging cycles: The batteries can be charged directly after use due to their low heat generation.|Suction starts automatically: The Bluetooth® battery packs start a paired vacuum cleaner automatically when the tool is switched on.|Smart extended: The Festool app, in combination with the Bluetooth® function of the battery pack, enables clever additional functions, such as the detailed display of the charge status and other operating data such as temperature or charge cycles.|Charged at lightning speed: Ready for use again in 25 minutes thanks to the AIRSTREAM SCA 16 quick charger. This is made possible by active cooling during the charging process.|All-round cover: It goes without saying that chargers and battery packs are also fully covered by Festool Service. Battery products' power supply. Extremely powerful.|Hardy and high-performing work.|Completely covered. The 18 V starter set is the power pack for your Festool cordless tools and provides you with the power you need. The set contains two 8.0 Ah tabless battery packs and an AIRSTREAM quick charger - so you can get started straight away.|TBX 8 battery packs offer you maximum runtimes and full power for your toughest applications. Thanks to tabless cell technology, they not only run longer, but can also be recharged at lightning speed with the AIRSTREAM SCA 16 quick charger - for continuous and long-lasting work.|All Festool battery packs and chargers, like all Festool tools, are of course completely covered by Festool SERVICE, giving you peace of mind for your day-to-day work. This allows you to concentrate on what's most important: Your work. Incredibly powerful with a long battery life|Charged in a heartbeat|More functions: With Bluetooth® and The Festool app. Thanks to tabless cell technology, the TBX 8 battery pack is ideal for heavy-duty applications with the highest power requirements.|Due to their low heat generation, tabless battery packs can be charged directly without a cooling phase - so they are ready for use again in a flash.|With the Bluetooth® battery pack, a paired vacuum cleaner is started automatically when the cordless tool is switched on. With The Festool app, you can display detailed information on the battery pack's charge status at anytime and call up operating data such as temperature and charge cycles. as an ideal addition to the Basic variants or as additional battery packs for the workshop or construction site. for all applications and 18-volt gear – with an emphasis on top performance and stamina (except ETSC 125, RTSC 400, DTSC 400, CTC SYS)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":56991795872127,"sku":"FES578898","price":438.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578898.webp?v=1773158697"},{"product_id":"fes578574","title":"FESTOOL ACCESSORY 578574 SYS-Powerhub SYS3-PH M187 (Pre-order)","description":"\u003cp\u003eThe cable reel with corners and edges. Discover the innovative cable reel with system: The SYS3 PowerHub combines all the advantages of a cable reel with the Festool Systainer system. With a 10 m cable that is neatly stowed away inside during transport and four external 230 V sockets, it offers you the independence you need for your power tools. You can also charge your smartphone or tablet safely and securely via the internal socket. It goes without saying that the SYS3 PowerHub is splash-proof (IP44) and can be easily connected to other Systainers and transported using the SYS-Roll transport trolley or the SYS-RB roller board. The SYS3 PowerHub: Systematic power distribution. Tidy: The permanently connected, 10 m long cable (H07 RN-F 3G1.5 mm2) can be conveniently stored in the interior. You can also store your battery packs or small parts there.|Versatile: Supplies up to four power tools with power at the same time. Inside you can also charge a mobile phone or tablet safely.|Safe: The internal socket is protected against dust and dirt. The integrated thermal overload protection offers additional safety.|Practical: Thanks to the cable outlet, the PowerHub can also be connected to other Systainers when connected.|Reliable: When connected to the mains, the red light on the front signals that the machine is ready for use.|Compatible: Fits the entire Festool Systainer system – easy to connect and transport. Systainer with integrated sockets and 10 m cable for use as a power distributor on the construction site, which can be fully integrated into the Systainer system. Power distribution in Systainer format.|The cable reel with a system.|Robust and suitable for the construction site. With its four external 230V sockets, the SYS3 PowerHub reliably supplies your power tools, vacuum cleaners or chargers with power. You can also charge your smartphone or tablet at the internal socket, safely protected from dust and dirt.|With the SYS3 PowerHub, you have a cable reel that is compatible with your tools. You can connect it to other Systainers and transport it effortlessly on a trolley, for example. There is also space inside for your other accessories and small parts - that's organisation with a system.|The SYS3 PowerHub is also your reliable companion for tough construction site use: the electrical system and sockets are splash proof (IP 44) and the integrated thermal circuit breaker protects against overheating. The robust, 10 m long power cable (H07 RN-F 3G1.5 mm2) can be easily stowed inside the Systainer for transport. Instead of tangled cables|Protection zone|Flexible compatibility|Four plus one. The securely connected connection cable with a length of 10 m can be conveniently stowed in the interior for transport. The SYS-PowerHub also features additional room for any battery packs or small parts required.|A mobile phone or tablet, for example, can be connected to the socket inside - safely protected from dust and dirt. The integrated thermal overload protection provides additional safety.|The cable outlet is integrated at the front of the Systainer - so the SYS3 PowerHub can also be connected to other Systainers when connected.|The SYS-PowerHub can supply power to up to four power tools simultaneously – and the internal power socket can be used to charge a mobile phone or tablet while protecting it against contamination, if required. cannot be coupled with Classic systainers|for connecting power tools, chargers, mobile dust extractors, working lights, etc.|4x external sockets|1x internal socket|integrated thermal protection switch|10 m connection cable, type H07 RN F3G1.5, securely connected.\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014284845439,"sku":"FES578574","price":167.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578574.png?v=1772718618"},{"product_id":"fes578695","title":"FESTOOL ACCESSORY 578695 Plunge position indicator FS-EP TS\/TSC55 (Pre-order)","description":"\u003cp\u003ePrecise plunge-cuts for all cutting depths. We know: Hitting the plunge position exactly is a challenge - especially with a reduced cutting depth when there is no orientation. Several plunge cuts or even dangerous backward sawing are often necessary. With the plunge-cut position indicator, you can reliably hit the exact entry and exit point of your saw blade at any cutting depth. Simply insert it into the groove of the guide rail from above and fix it in place. Then adjust the scale of the marking indicator to the depth setting of your plunge-cut saw, align it with the marking and place the cut-outs precisely where you need them. The marking indicator can also be magnetically attached to the right or left of the support plate. This allows you to reliably saw cut-outs close to walls, even if your view of the saw blade is limited or non-existent. Precise plunge-cutting: Entry and exit point of the saw blade is precisely displayed for the desired cutting depth.|Plunge cutting close to the wall: Sawing on the cutting mark to the left and right of the guide rail for cut-outs close to the wall.|Stop stop: Position indicator can be used as an end and start stop for the machine.|Easy to align: Position indicator can be aligned directly to the mark or marking. Precise, dimensionally accurate plunge cuts|Position indicator shows the exact entry and exit position of the saw blade|Cut-outs at positions close to the wall|Plunge cuts with the same length|Cutting width indicator for applications where the dimension is to the right of the guide rail - e.g. when cutting narrow panel strips or working with the FS on the cut-off side. Simply precise cutting.|Even close to the wall: accurate to the millimetre.|Saw without unplanned kerf losses. Time-consuming alignment is a thing of the past: The plunge-cut position indicator shows you the exact entry and exit point of the saw blade for the desired cutting depth. For precise and clean plunge-cuts with the guide rail, from the start to the end position.|Precise even in places close to the wall: Thanks to the symmetrical design of the support plate, you can easily position the marking indicator to the right and left of the guide rail. This allows you to saw cut-outs on the wall with millimetre precision - even when the view of the saw blade is limited or non-existent.|Saw narrow panel strips - without permanent kerf detection, without spacers: The cutting width indicator shows you the exact cutting width, for precise positioning markings to the right of the saw blade. This allows you to work faster, more accurately and without unnecessary tools. Precise plunge cuts|Quickly aligned|Sawing close to the wall|Guide limitation|Uncomplicated handling|Cutting width indicator|Safe immersion|Adjustable precision. The entry and exit points of the saw blade are precisely indicated for the desired cutting depth.|Simply align the position indicator to the desired start and end position, position the saw and perform the plunge cut.|Magnetic fixing of the marking indicator - on the right or left of the support plate. This means that cut-outs close to the wall are also possible without any problems.|The position indicators serve as rear and front stop positions on the guide rail.|Simply insert from above onto the guide rail groove and fix without tools.|The indicator for the cutting width of the saw blade enables cutting to the millimetre - both for narrow panel strips and when working with a guide rail on the cutting side.|A plastic nose prevents the plunge saw from rising when plunging into the material.|Fine adjustment for precise calibration of the scale - suitable for the machine, guide rail and resharpened saw blades. for precise cut-outs with plunge-cut saw and FS\/2 guide rail. for TS 55 R, TS 55 F, TSC 55, TSC 55 K, TSC 55 KS\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014288122239,"sku":"FES578695","price":65.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578695.webp?v=1772718711"},{"product_id":"fes578696","title":"FESTOOL ACCESSORY 578696 Plunge position indicator FS-EP TS60 (Pre-order)","description":"\u003cp\u003ePrecise plunge-cuts for all cutting depths. We know: Hitting the plunge position exactly is a challenge - especially with a reduced cutting depth when there is no orientation. Several plunge cuts or even dangerous backward sawing are often necessary. With the plunge-cut position indicator, you can reliably hit the exact entry and exit point of your saw blade at any cutting depth. Simply insert it into the groove of the guide rail from above and fix it in place. Then adjust the scale of the marking indicator to the depth setting of your plunge-cut saw, align it with the marking and place the cut-outs precisely where you need them. The marking indicator can also be magnetically attached to the right or left of the support plate. This allows you to reliably saw cut-outs close to walls, even if your view of the saw blade is limited or non-existent. Precise plunge-cutting: Entry and exit point of the saw blade is precisely displayed for the desired cutting depth.|Plunge cutting close to the wall: Sawing on the cutting mark to the left and right of the guide rail for cut-outs close to the wall.|Stop stop: Position indicator can be used as an end and start stop for the machine.|Easy to align: Position indicator can be aligned directly to the mark or marking. Precise, dimensionally accurate plunge cuts|Position indicator shows the exact entry and exit position of the saw blade|Cut-outs at positions close to the wall|Plunge cuts with the same length|Cutting width indicator for applications where the dimension is to the right of the guide rail - e.g. when cutting narrow panel strips or working with the FS on the cut-off side. Simply precise cutting.|Even close to the wall: accurate to the millimetre.|Saw without unplanned kerf losses. Time-consuming alignment is a thing of the past: The plunge-cut position indicator shows you the exact entry and exit point of the saw blade for the desired cutting depth. For precise and clean plunge-cuts with the guide rail, from the start to the end position.|Precise even in places close to the wall: Thanks to the symmetrical design of the support plate, you can easily position the marking indicator to the right and left of the guide rail. This allows you to saw cut-outs on the wall with millimetre precision - even when the view of the saw blade is limited or non-existent.|Saw narrow panel strips - without permanent kerf detection, without spacers: The cutting width indicator shows you the exact cutting width, for precise positioning markings to the right of the saw blade. This allows you to work faster, more accurately and without unnecessary tools. Precise plunge cuts|Quickly aligned|Sawing close to the wall|Guide limitation|Uncomplicated handling|Cutting width indicator|Safe immersion|Adjustable precision. The entry and exit points of the saw blade are precisely indicated for the desired cutting depth.|Simply align the position indicator to the desired start and end position, position the saw and perform the plunge cut.|Magnetic fixing of the marking indicator - on the right or left of the support plate. This means that cut-outs close to the wall are also possible without any problems.|The position indicators serve as rear and front stop positions on the guide rail.|Simply insert from above onto the guide rail groove and fix without tools.|The indicator for the cutting width of the saw blade enables cutting to the millimetre - both for narrow panel strips and when working with a guide rail on the cutting side.|A plastic nose prevents the plunge saw from rising when plunging into the material.|Fine adjustment for precise calibration of the scale - suitable for the machine, guide rail and resharpened saw blades. for precise cut-outs with plunge-cut saw and FS\/2 guide rail. for TS 60 K\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014288155007,"sku":"FES578696","price":65.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578696.webp?v=1772718698"},{"product_id":"fes578697","title":"FESTOOL ACCESSORY 578697 Accessories set ZS FS-EP TS\/TSC55 (Pre-order)","description":"\u003cp\u003ePrecise plunge cuts in the Systainer. This set is the perfect addition to your plunge-cut saw: With the plunge-cut position indicator, you can reliably hit the exact entry and exit point of your saw blade at any cutting depth. Simply insert it into the groove of the guide rail from above and fix it in place. Then adjust the scale of the marking indicator to the depth setting of your plunge-cut saw, align it with the marking and place the cut-outs precisely where you need them. With the matching one-hand clamps, you can fix your guide rail to the workpiece with just one hand, for safer and more controlled work. There is also space in the Systainer for your saw blades and FS connectors - so you always have your system accessories to hand. Exact plunge cut: The entry and exit point of the saw blade is displayed exactly for the desired cutting depth, even for cut-outs close to walls.|Stop stop: Position indicator can be used as an end and start stop for the machine.|Easy to align: Position indicator can be aligned directly to the mark or marking.|Quickly fixed: One-handed operation of the clamp makes it easier to clamp the guide rail or workpiece.|Easy transport: You can transport and store your system accessories safely in the Systainer.|Additional storage space: space for circular saw blades and FS connectors is provided in the Systainer. FS-EP position indicator for precise, dimensionally accurate plunge cuts, cut-outs at positions close to the wall|Cutting width indicator for applications where the dimension is to the right of the guide rail - e.g. when cutting narrow panel strips or working with the FS on the cut-off side|FS-EZ one-hand clamp for securely fixing the guide rail and for clamping or spreading workpieces. Simply precise cutting.|All in one place.|Systems get it done. Time-consuming alignment is a thing of the past: The plunge-cut position indicator shows you the exact entry and exit point of the saw blade for the desired cutting depth. For precise and clean plunge-cuts with the guide rail, from the start to the end position.|The accessory set with plunge position indicator and two one-hand clamps enables you to make precise and safe plunge cuts at all cutting depths. The Systainer also ensures easy, bundled transport and offers additional space for other accessories such as saw blades and FS connectors.|Our accessory solutions reliably take you one step further. Perfectly coordinated, they enable you to optimise your workflow. So you can achieve what really counts: Your best possible work result. Precise plunge cuts|Sawing close to the wall|Cutting width indicator|Effortless fixing|Always at hand|A tidy storage system. The entry and exit points of the saw blade are precisely indicated for the desired cutting depth.|Magnetic fixing of the marking indicator - on the right or left of the support plate. This means that cut-outs close to the wall are also possible without any problems.|The indicator for the cutting width of the saw blade enables cutting to the millimetre - both for narrow panel strips and when working with a guide rail on the cutting side.|The guide rail is fixed to the workpiece with the one-hand clamps in just one movement. For safe and controlled work.|Every part of the position indicator has its fixed place in the Systainer. Clamps and other accessories such as saw blades and FS connectors are also safely stowed away.|The Systainer³ can be connected to each other and to many other system accessories, e.g. mobile suction units. for precise cut-outs with plunge-cut saw and FS\/2 guide rail. for TS 55 R, TS 55 F, TSC 55, TSC 55 K, TSC 55 KS\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014288253311,"sku":"FES578697","price":103.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578697.webp?v=1773229777"},{"product_id":"fes578698","title":"FESTOOL ACCESSORY 578698 Accessories set ZS FS-EP TS60 (Pre-order)","description":"\u003cp\u003ePrecise plunge cuts in the Systainer. This set is the perfect addition to your plunge-cut saw: With the plunge-cut position indicator, you can reliably hit the exact entry and exit point of your saw blade at any cutting depth. Simply insert it into the groove of the guide rail from above and fix it in place. Then adjust the scale of the marking indicator to the depth setting of your plunge-cut saw, align it with the marking and place the cut-outs precisely where you need them. With the matching one-hand clamps, you can fix your guide rail to the workpiece with just one hand, for safer and more controlled work. There is also space in the Systainer for your saw blades and FS connectors - so you always have your system accessories to hand. Exact plunge cut: The entry and exit point of the saw blade is displayed exactly for the desired cutting depth, even for cut-outs close to walls.|Stop stop: Position indicator can be used as an end and start stop for the machine.|Easy to align: Position indicator can be aligned directly to the mark or marking.|Quickly fixed: One-handed operation of the clamp makes it easier to clamp the guide rail or workpiece.|Easy transport: You can transport and store your system accessories safely in the Systainer.|Additional storage space: space for circular saw blades and FS connectors is provided in the Systainer. FS-EP position indicator for precise, dimensionally accurate plunge cuts, cut-outs at positions close to the wall|Cutting width indicator for applications where the dimension is to the right of the guide rail - e.g. when cutting narrow panel strips or working with the FS on the cut-off side|FS-EZ one-hand clamp for securely fixing the guide rail and for clamping or spreading workpieces. Simply precise cutting.|All in one place.|Systems get it done. Time-consuming alignment is a thing of the past: The plunge-cut position indicator shows you the exact entry and exit point of the saw blade for the desired cutting depth. For precise and clean plunge-cuts with the guide rail, from the start to the end position.|The accessory set with plunge position indicator and two one-hand clamps enables you to make precise and safe plunge cuts at all cutting depths. The Systainer also ensures easy, bundled transport and offers additional space for other accessories such as saw blades and FS connectors.|Our accessory solutions reliably take you one step further. Perfectly coordinated, they enable you to optimise your workflow. So you can achieve what really counts: Your best possible work result. Precise plunge cuts|Sawing close to the wall|Cutting width indicator|Effortless fixing|Always at hand|A tidy storage system. The entry and exit points of the saw blade are precisely indicated for the desired cutting depth.|Magnetic fixing of the marking indicator - on the right or left of the support plate. This means that cut-outs close to the wall are also possible without any problems.|The indicator for the cutting width of the saw blade enables cutting to the millimetre - both for narrow panel strips and when working with a guide rail on the cutting side.|The guide rail is fixed to the workpiece with the one-hand clamps in just one movement. For safe and controlled work.|Every part of the position indicator has its fixed place in the Systainer. Clamps and other accessories such as saw blades and FS connectors are also safely stowed away.|The Systainer³ can be connected to each other and to many other system accessories, e.g. mobile suction units. for precise cut-outs with plunge-cut saw and FS\/2 guide rail. for TS 60 K\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014288417151,"sku":"FES578698","price":103.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578698.webp?v=1773229657"},{"product_id":"fes578517","title":"FESTOOL ACCESSORY 578517 Boom arm CT-ASA FLX J (Pre-order)","description":"\u003cp\u003eThe mobile dust extraction arm for the construction site. This is what modern dust extraction looks like: The flexible, top-guided extraction arm ensures a clear path - no snagging, no tripping. Thanks to the modular chain links and telescopic tube, it adapts to any work situation. It is compactly stowed in the Systainer and quickly mounted on the vacuum cleaner or MFT. Simply unroll, attach and get started - for ergonomic, clean work with maximum comfort. Hose guide from above: Ergonomic, comfortable working without tripping or getting caught.|Space-saving: The extraction arm can be rolled and stowed in the Systainer.|Clever combination: The flex arm is supplied in the SYS-MFT. This allows the extraction arm and telescopic tube to be securely fixed to the vacuum cleaner.|Height-adjustable: the telescopic tube can be adjusted in height.|Variable attachment: The flex arm can also be attached directly to the MW 1000 mobile workshop or an MFT multifunction table using the telescopic tube.|Easy to set up: Unroll, attach, get started.|Tidy: integrated cable routing, can be fixed with Velcro straps.|Quick machine change: plug it cable on the tools enables quick device changes.|Robust: Made from ten high-quality, lightweight plastic links.|Flexible length: The 1 m long flexible arm can be shortened as required using easily removable chain links.|SYS-MFT: Lid with MFD plate for clamping and fixing workpieces. Ideal for working at mobile stations, e.g. for sanding work|Hose guide from above on the MFT|Flexible use on the construction site and workshop. Ergonomic hose guide from above.|Fits perfectly.|Mobile in the system. For comfortable working during longer sanding, sawing or routing jobs: The flexible extraction arm is guided from above so that the hose and cable are not in the way or get caught up. More comfort, no tripping. This is how efficient dust extraction works today.|Thanks to modular, lightweight chain links made of robust plastic, you can easily adjust the length of the extraction arm. The telescopic tube allows individual height adjustment. The swivelling extraction arm provides more space when working.|Neatly rolled up in the SYS-MFT Systainer, you can take the flexible arm with you to any construction site. There it can be easily attached to a suction cup. It can also be attached directly to the MW 1000 mobile workshop or any MFT. Simply unroll, attach and get started. Hose guide from above|Rolled up and stowed in the Systainer|Cleverly combinable|Variable height, secure hold|Organised|Quick machine change|Flexible length|SYS-MFT. The flexible, top-guided extraction arm ensures ergonomic, comfortable working without tripping or getting stuck.|Thanks to the modular arrangement of the links, the extraction arm can be rolled and stored in the Systainer.|The flexible arm is supplied in the SYS-MFT. This allows the extraction arm and telescopic tube to be securely fixed to the vacuum cleaner via T-LOC.|The height of the telescopic tube supplied can be individually adjusted. This allows the extraction arm to be securely attached to the SYS-MFT. Or directly on the MW 1000 mobile workshop or an MFT multifunction table.|The hose and power cable are routed inside the extraction arm. Both can be attached to the chain links using Velcro straps.|The plug it cable on the tools allows you to change tools quickly.|The 1 m long flexible arm can be adjusted as required for your purposes. The robust chain links can be easily separated and rejoined.|The Systainer lid has an MFD perforated plate. For clamping and fixing workpieces and for attaching the extraction arm using the telescopic tube. flexible extraction arm for attachment to the mobile extraction unit. for CT 26 to 48\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014364045695,"sku":"FES578517","price":239.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578517_4f6985f2-4c01-420a-b946-57fa19d92f3c.webp?v=1772718477"},{"product_id":"fes578518","title":"FESTOOL ACCESSORY 578518 Boom arm CT-ASA FLX W (Pre-order)","description":"\u003cp\u003eThe flexible extraction arm for your workshop. The swivelling, top-guided extraction arm ensures a clear path - no snagging, no tripping. Easily adjustable to a length of up to 1.5 m and can be securely fixed to the wall. In combination with suction cups and accessories such as a Y-valve or pre-separator, a perfectly organised system for efficient dust extraction is created - ideal for long sanding, sawing or milling jobs. For ergonomic, clean working with maximum comfort. Hose guide from above: Ergonomic, comfortable working without tripping or getting caught.|Tidy: integrated cable routing, can be fixed with Velcro straps.|Quick machine change: plug it cable on the tools enables quick device changes.|Space-saving: The modular, swivelling design makes it easy to move the extraction arm out of the way.|Flexible length: The 1.5 m long flexible arm can be shortened as required using easily removable chain links.|Universal mounting: Can be securely attached to almost all wall types thanks to its low weight.|Robust: Made from 13 high-quality, lightweight plastic links. Ideal for working at work stations, e.g. when sanding|For use in the workshop. Ergonomic hose guide from above.|Fits perfectly.|Low dust in the workshop. For comfortable working during longer sanding, sawing or routing jobs: The flexible extraction arm is guided from above so that the hose and cable are not in the way or get caught up. More comfort, no tripping. This is how efficient dust extraction works today.|Modular, lightweight chain links made of robust plastic allow the length of the flex arm to be easily adjusted up to 1.5 m. In addition, the extraction arm can be swivelled for greater mobility in your workshop.|The wall bracket allows the extraction arm to be securely fixed in the workshop in a space-saving manner. In combination with a vacuum cleaner and pre-separator, you can also handle large quantities of dust with ease. This keeps your workplace perfectly organised and your extraction system always to hand. Hose guide from above|Organised|Out of the way|Flexible length|Universal bracket|Quick machine change|Clever combination. The flexible, top-guided extraction arm ensures clean working without tripping or getting caught.|The hose and power cable are routed inside the extraction arm. Both can be attached to the chain links using Velcro straps.|The modular, swivelling design makes it easy to move the extraction arm to the side.|The 1.5 m long flex arm can be adjusted as required for your purposes. The chain links can be easily separated and rejoined.|The wall bracket can be used to securely and swivellingly fix the extraction arm in the workshop. Thanks to its low weight, the extraction arm can be attached to almost any type of wall.|The plug it cable on the tools allows you to change tools quickly.|In stationary operation, the extraction arm in conjunction with the pre-separator is also perfect for large quantities of dust. extraction arm for mounting on the wall. for CT 26 to 48\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014364176767,"sku":"FES578518","price":199.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578518_1f5dc17a-8c85-48a7-9d80-c62d76766dcf.webp?v=1772718477"},{"product_id":"fes578944","title":"FESTOOL ACCESSORY 578944 Chain links KGL-CT-ASA FLX\/3 (Pre-order)","description":"\u003cp\u003eThree chain links for your extraction arm. With three individual chain links, the wall version of the CT-ASA FLX W extraction arm can be flexibly extended by 10, 20 or 30 cm. Alternatively, individual links can be replaced as required. Robust and flexible: The chain links can be easily separated and reassembled. Extension|Quick exchange. Three separate chain links allow the extraction arm of the wall version to be extended by 10 cm each. Up to a maximum of 30 cm.|Individual chain links can be replaced quickly and without tools. three separate chain links. for CT-ASA FLX J\/W\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014364832127,"sku":"FES578944","price":16.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578944.webp?v=1772723470"},{"product_id":"fes578938","title":"FESTOOL ACCESSORY 578938 Mounting rail hangers HA-FS\/2 (Pre-order)","description":"\u003cp\u003eBring order to your workshop. No more rails lying around! With the FS bracket, your guide rail finally has a fixed place in the workshop. Simply mounted on the wall, work surfaces, floors and room corners remain free and tidy. Suitable for all FS guide rails from 800 mm to 5,000 mm in length. This keeps your rails protected, tidy and ready to hand at all times. More organisation: Gives the guide rail a fixed place in the workshop.|Safe storage: Protects the guide rail from damage.|Space-saving: Simple wall mounting. For storing the guide rail|For workshop organisation. for all FS guide rails from 800 mm to 5,000 mm. for FS\/2, FS\/2 KP\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014379872639,"sku":"FES578938","price":10.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578938.webp?v=1772894756"},{"product_id":"fes578591","title":"FESTOOL ACCESSORY 578591 Light module LM-TS\/TSC (Pre-order)","description":"\u003cp\u003eSpotlight for your cut. Quick and straightforward retrofitting for perfect illumination: The LED light is attached directly to the saw, ensuring shadow-free lighting of your right-hand sawing area. With two brightness settings, it offers optimal visibility of the scribe mark for approximately 130 sawing cycles. The self-adhesive metal plate allows for easy attachment to the machine, enabling the magnetic LED light to be effortlessly retrofitted to all TS plunge-cut saws. The unit features a charge level indicator, is detachable and can be recharged via a USB-C port. Optimal work results: shadow-free illumination directly on the workpiece.  Individually adjustable: Depending on the working environment, two brightness levels (70\/40 lumens) can be selected.  Long-lasting: Up to 6.5 hours of illumination, including battery level indicator and automatic shutdown after approximately 2.5 minutes.  Rechargeable: USB-C connection with standard charging cable.  Simple assembly: The metal plate firmly affixed to the saw, in tandem with the magnet integrated into the Light module, allows for fast and tool-free attachment and detachment. Optimal illumination of the entire sawing area from the right side – including the rear plunge-cut area, ideal for precise cut-outs on position.  Sawing with a clear view of the scribe mark and saw blade under poor lighting conditions. Optimal lighting conditions.  Simply attach.  Practical lighting control. The LED clip-on light illuminates your sawing area. It provides shadow-free lighting to the right of the plunge-cut saw – precisely where it matters: directly on the workpiece.  Secure the metal plates to the saw once, allowing the light to be magnetically attached at any time with flexibility. Easily retrofittable to all TS plunge saws, it immediately enhances visibility during cutting.  Two brightness levels for adjustable illumination with a runtime of up to 6.5 hours. If the light is unintentionally left on, it will automatically switch off after approximately 2 minutes 30 seconds. light module as an accessory for all TS plunge-cut saws. for TS 55, TSC 55, TSC 55 K, TSC 55 KS, TS 60 K, TSV 60 K, TS 75\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014397895039,"sku":"FES578591","price":45.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578591.webp?v=1773485973"},{"product_id":"fes578708","title":"FESTOOL ACCESSORY 578708 Light module LM-DTS (Pre-order)","description":"\u003cp\u003eLight on - for your compact sander. The Festool light module adds a crucial detail to your compact sanders: perfect visibility. Thanks to the targeted illumination, you can recognise unevenness immediately - for more precise results without reworking. With two light levels, you can quickly adjust the brightness to your work situation and avoid glare. The automatic start via vibration detection ensures that the light is active exactly when you need it. Plug in without tools and get started - work with maximum control for perfect surfaces. Light on: Two light modes can be set on the light module: Full illumination or dimmed light.  Easy handling: The light module can be easily attached to your compact sander.  For all compact sanders: Suitable for ETS, RTS, DTS including all cordless compact sanders.  Simply mounted: Tool-free attachment - for maximum flexibility.  Long runtime: Up to 2.5 hours of continuous operation at maximum brightness, rechargeable via USB-C® in just 80 minutes.  Automatic start: thanks to vibration detection, the light module on your sanding machine is switched on and off automatically. Targeted illumination of your surface to detect unevenness. Controlled sanding in the detail and edge area. Outstanding work results on the construction site and in the workshop. Perfect view of your finish.  Plug it in and get started.  Developed for your compact sander. The LED light module for your compact sander improves your view of the surface and makes it easier to recognise unevenness. Two light modes can be set on the light module: Full illumination or dimmed light.  Plug in without tools and get started. Whether in the workshop or on the construction site, the light module sits securely on your compact sander so you can start sanding straight away. Thanks to vibration detection, the light module on your sander switches on and off automatically.  Perfectly matched to all cordless compact sanders with ErgoPack and to the cable versions ETS, RTS and DTS from 2017. Robustly built and with a runtime of up to 6 hours, the light module ensures permanently reliable lighting - for every job. Illuminating. Simply mounted. Long runtime. Automatic start. Two light modes can be set on the light module: Full illumination or dimmed light.  Tool-free attachment - for maximum flexibility.  Up to 2.5 hours of continuous operation at maximum brightness, rechargeable via USB-C in 80 minutes.  Thanks to vibration detection, the light module on your sander switches on and off automatically. for DTSC 400, DTS 400 REQ, ETSC 125, ETS 125 REQ (from 2017)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014398222719,"sku":"FES578708","price":56.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578708.png?v=1773486382"},{"product_id":"fes578836","title":"FESTOOL ACCESSORY 578836 Light module LM-RTS (Pre-order)","description":"\u003cp\u003eLight on - for your compact sander. The Festool light module adds a crucial detail to your compact sanders: perfect visibility. Thanks to the targeted illumination, you can recognise unevenness immediately - for more precise results without reworking. With two light levels, you can quickly adjust the brightness to your work situation and avoid glare. The automatic start via vibration detection ensures that the light is active exactly when you need it. Plug in without tools and get started - work with maximum control for perfect surfaces. Light on: Two light modes can be set on the light module: Full illumination or dimmed light.  Easy handling: The light module can be easily attached to your compact sander.  For all compact sanders: Suitable for ETS, RTS, DTS including all cordless compact sanders.  Simply mounted: Tool-free attachment - for maximum flexibility.  Long runtime: Up to 2.5 hours of continuous operation at maximum brightness, rechargeable via USB-C® in just 80 minutes.  Automatic start: thanks to vibration detection, the light module on your sanding machine is switched on and off automatically. Targeted illumination of your surface to detect unevenness. Controlled sanding in the detail and edge area. Outstanding work results on the construction site and in the workshop. Perfect view of your finish.  Plug it in and get started.  Developed for your compact sander. The LED light module for your compact sander improves your view of the surface and makes it easier to recognise unevenness. Two light modes can be set on the light module: Full illumination or dimmed light.  Plug in without tools and get started. Whether in the workshop or on the construction site, the light module sits securely on your compact sander so you can start sanding straight away. Thanks to vibration detection, the light module on your sander switches on and off automatically.  Perfectly matched to all cordless compact sanders with ErgoPack and to the cable versions ETS, RTS and DTS from 2017. Robustly built and with a runtime of up to 6 hours, the light module ensures permanently reliable lighting - for every job. Illuminating. Simply mounted. Long runtime. Automatic start. Two light modes can be set on the light module: Full illumination or dimmed light.  Tool-free attachment - for maximum flexibility.  Up to 2.5 hours of continuous operation at maximum brightness, rechargeable via USB-C in 80 minutes.  Thanks to vibration detection, the light module on your sander switches on and off automatically. for RTSC 400, RTS 400 REQ, ETSC 125, ETS 125 REQ (from 2017)\u003c\/p\u003e","brand":"Toolfest","offers":[{"title":"Default Title","offer_id":57014398386559,"sku":"FES578836","price":56.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0985\/4386\/2143\/files\/FES578836.png?v=1773486366"}],"url":"https:\/\/toolfest.myshopify.com\/collections\/frontpage.oembed","provider":"Toolfest","version":"1.0","type":"link"}