The attachment for straight drilling. Anywhere. The MB 40 mobile drilling attachment is your companion when precision is required. As a compact drilling aid, it enables you to drill at right angles with pinpoint accuracy and repeat accuracy, no matter where you are working. Versatile stops and exact depth adjustment allow you to drill vertical holes, end face holes and a series of holes. For a good view of the drilling point, you can couple the dust extraction directly with the base plate. As a further FastFix attachment, it is ideally suited to your drilling applications in wood, metal and plastic, thus expanding the range of possible uses for your Festool cordless drills. Precise: Built to be robust and stable – for exact holes.|Exact depth adjustment: With zero position and readable drilling depth up to 50 mm. Display in mm and inches.|Versatile accessories: With parallel side fence and stop for end face holes, for drilling holes exactly and with repeat accuracy in panel edges, or guide rail adapter for drilling in long and wide workpieces.|Exceptional: With hole series function for holes in the 32-type system.|Compatible: The tool chuck can be fitted quickly and without tools. The CENTROTEC chuck also enables quick insertion and replacement of drilling tools.|Integrated: Chip extraction for extractors from dust class M and hose diameter D 27.|Easy positioning: Markings on the base plate simplify exact alignment on the workpiece.|Sturdy: Rubberised base for precise alignment without slipping.|Clearly organised: Compact and cleverly packed in the Systainer³. Creating holes at a 90° angle|Making short hole series in the System 32|Drilled holes for fittings like cupboard hinges|Holes for shelf support|Drilling in wood, metal and plastic|Drilling knot holes|Assembly work|Kitchen fitting|Furniture manufacture. When precision is required.|Ready for use everywhere.|Suitable for your application. Do you want holes drilled at right angles with pinpoint accuracy and repeat accuracy? The MB 40 mobile drilling attachment is made for exactly this: Solid and stable construction, with depth adjustment via a scale and a variety of stops and adapters.|The mobile drilling attachment comes to the workpiece and not the other way round. It is handy and compact, so you can easily take it with you wherever you go.|The FastFix attachment, which you can customise to your individual needs: It can be quickly converted for drilling holes in workpiece edges and, here as well, it guarantees you the precision that you need. FastFix attachment|Depth-controlled|Hole series function|Parallel side fence|Stop for end face holes|Guide rail adapter|Spring-loaded supports|Variable use|Scribe marks and other markings|Dust extraction. Enables you to fit Festool cordless drills and cordless percussion drills quickly, easily and entirely without tools.|For depth-limited holes up to 50 mm, such as series of holes or cupboard hinges, the exact plunge depth into the material can be set in mm or inches using the scale.|For holes in the 32 mm system with a 3 mm hole series pin and a 5 mm hole series pin. The pin stays in the same spot throughout the hole series project. No need to switch the pin.|For fast and precise drilling with repeat accuracy, parallel to an edge.|Enables precise drilling in panel edges.|For fast drilling in a line. The adapter can be attached to all Festool guide rails without tools.|Enable easy guidance when drilling. For special applications, you can convert the drilling attachment and remove the spring.|Thanks to the holes in the base plate, you can fit the MB 40 on a workpiece or on individually built fixtures.|Help when drilling series of holes, cupboard hinges and alignment on the scribe mark, to achieve drilled holes with pinpoint accuracy.|For a clear view of the drilling point and a clean working environment, a mobile dust extractor from dust class M can be connected to the extractor connector. for CXS/TXS 12, CXS/TXS 18, TPC 18/4, TDC 18/4, C 18, T 18 with FastFix holder|not suitable for CXS/TXS
