Precise plunge-cuts for all cutting depths. We know: Hitting the plunge position exactly is a challenge - especially with a reduced cutting depth when there is no orientation. Several plunge cuts or even dangerous backward sawing are often necessary. With the plunge-cut position indicator, you can reliably hit the exact entry and exit point of your saw blade at any cutting depth. Simply insert it into the groove of the guide rail from above and fix it in place. Then adjust the scale of the marking indicator to the depth setting of your plunge-cut saw, align it with the marking and place the cut-outs precisely where you need them. The marking indicator can also be magnetically attached to the right or left of the support plate. This allows you to reliably saw cut-outs close to walls, even if your view of the saw blade is limited or non-existent. Precise plunge-cutting: Entry and exit point of the saw blade is precisely displayed for the desired cutting depth.|Plunge cutting close to the wall: Sawing on the cutting mark to the left and right of the guide rail for cut-outs close to the wall.|Stop stop: Position indicator can be used as an end and start stop for the machine.|Easy to align: Position indicator can be aligned directly to the mark or marking. Precise, dimensionally accurate plunge cuts|Position indicator shows the exact entry and exit position of the saw blade|Cut-outs at positions close to the wall|Plunge cuts with the same length|Cutting width indicator for applications where the dimension is to the right of the guide rail - e.g. when cutting narrow panel strips or working with the FS on the cut-off side. Simply precise cutting.|Even close to the wall: accurate to the millimetre.|Saw without unplanned kerf losses. Time-consuming alignment is a thing of the past: The plunge-cut position indicator shows you the exact entry and exit point of the saw blade for the desired cutting depth. For precise and clean plunge-cuts with the guide rail, from the start to the end position.|Precise even in places close to the wall: Thanks to the symmetrical design of the support plate, you can easily position the marking indicator to the right and left of the guide rail. This allows you to saw cut-outs on the wall with millimetre precision - even when the view of the saw blade is limited or non-existent.|Saw narrow panel strips - without permanent kerf detection, without spacers: The cutting width indicator shows you the exact cutting width, for precise positioning markings to the right of the saw blade. This allows you to work faster, more accurately and without unnecessary tools. Precise plunge cuts|Quickly aligned|Sawing close to the wall|Guide limitation|Uncomplicated handling|Cutting width indicator|Safe immersion|Adjustable precision. The entry and exit points of the saw blade are precisely indicated for the desired cutting depth.|Simply align the position indicator to the desired start and end position, position the saw and perform the plunge cut.|Magnetic fixing of the marking indicator - on the right or left of the support plate. This means that cut-outs close to the wall are also possible without any problems.|The position indicators serve as rear and front stop positions on the guide rail.|Simply insert from above onto the guide rail groove and fix without tools.|The indicator for the cutting width of the saw blade enables cutting to the millimetre - both for narrow panel strips and when working with a guide rail on the cutting side.|A plastic nose prevents the plunge saw from rising when plunging into the material.|Fine adjustment for precise calibration of the scale - suitable for the machine, guide rail and resharpened saw blades. for precise cut-outs with plunge-cut saw and FS/2 guide rail. for TS 60 K
