Swivel-mounted stationary edging. The CONTURO is also suitable for working when stationary. It is simply inserted via this adapter plate in the MFT/3 multifunction table or a bench you have built yourself. Not only can you affix edging to straight edges or curves, but also oblique edges with an angle between 90° and 45° because the CONTURO can be tilted 90°–45° in the stationary unit. Flexible in use, the adapter plate can be built into a self-built table frame or into the MFT perforated board provided for it|Continuously adjustable angle of 0–47°|Allows the user to swivel the machine in the bench and position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects|Supplied sliding guides for guiding the workpiece safely|Perfect edging overhang when using the supplied sliding guides|Quick to install and remove the edge bander without tools|Secure fixing of the machine with slide lock|Additional roller as expansion of the pressure zone or for edging of complex shapes|Adjustable guide rail adapter for exactly parallel feeding in of the panel when edging mitres, therefore the edge doesn't run off course|Deflector that keeps the introduced edge away from the workpiece area|Start button of the machine always ideally reachable. For small series with straight edges|Edging of small free form elements that are difficult to clamp|Gluing inclined edges up to 47°. Always the right angle|Perfect guidance. The angle can be continuously adjusted between 0 and 47° using two clamping screws. Locking positions thereby help to quickly find the most important angles.|Thanks to the combination of sliding strip, adjustable guide rail adapter for exactly parallel feeding in of the panel and the additional roller, the workpiece is always guided cleanly and a perfect glued joint guaranteed. for using the edge bander KA 65 as a bench-mounted machine|adapter plate for installation in the MFT (with perforated board KA 65, order no. 500366) or a separate workbench. for KA 65
